|
| |
SPECIFICATIONS:
SPINDLE:
SPINDLE CONFIGURATION....................... ANSI A2-5"
HOLE THROUGH SPINDLE........................ 1-7/8"
16C COLLET CAPACITY......................... 1-5/8"
SPINDLE SPEED RANGE (1-RPM STEPS)........... 50-5000 RPM
AC SPINDLE DRIVE (100% POWER RATING)........ 7.4 HP
AC SPINDLE DRIVE (135% POWER RATING)........ 10 HP
AC SPINDLE DRIVE (162% POWER RATING)........ 12 HP
CAPACITY
MAX. SWING OVER BED......................... 14"
MAX. THREADING DIAMETER..................... 8"
MAX. TURNING DIAMETER....................... 8"
MAX. FIXTURE DIAMETER....................... 9"
MAX. ALLOWABLE WEIGHT ON SPINDLE
(INCLUDING WORK HOLDING DEVICE)............ 75 LB
TURRET
NUMBER OF STATIONS.......................... 8
SQUARE TOOL SIZE (STANDARD)................. 1/2"
ROUND TOOL DIAMETER (STANDARD).............. UP TO 3/4"
MAX. X-AXIS TRAVEL.......................... 4-1/2"
MAX. Z-AXIS TRAVEL.......................... 12"
MAX. X AND Z AXIS FEEDRATE.................. 200 IPM
MAX. DISTANCE FROM TURRET FACE TO SPINDLE.... 12-1/2"
INDEXING TIME (STATION 1 TO 8).............. 2 SECONDS
INDEXING TIME (STATION-TO-STATION).......... 1 SECOND
MISCELLANEOUS:
MIN. PROGRAMMABLE RESOLUTION................ 0.0001"
MIN. TOOL OFFSET CAPABILITY................. 0.0001"
COMPRESSED AIR REQUIREMENT.................. 70 MIN. TO
90 MAX. PSI
COOLANT SUMP CAPACITY....................... 30 U.S. GAL
APPROX SKIDDED WEIGHT....................... 5000 LBS.
MACHINE DIMENSIONS (LENGTH)................. 91-1/2"
DIMENSIONS WITH CHIP REMOVAL SYSTEM:
126-1/2" L x 61-1/2" D x 64-1/2" H
HEIGHT WITH GUARD DOOR RAISED............... 80-3/4"
GENERAL NUMERIC 10TF CNC CONTROL FEATURES:
INCH/METRIC DATA SELECTION
DATA INPUT/OUTPUT:
BACKGROUND EDITING-PART PROGRAM INPUT DURING MACHINING
CYCLE ALPHA-NUMERIC KEYBOARD FOR MDI (MANUAL DATA INPUT), TOOL DATA CHANGES, AND
PART PROGRAM EDITING.
PROGRAMMING FUNCTIONS:
SYMBOLIC FAPT TURN CONVERSATIONAL PROGRAMMING
CONSTANT SURFACE SPEED PROGRAMMING
DIRECT RPM PROGRAMMING
IPM/IPR (MMPM/MMPR) PROGRAMMING
DIAMETER PROGRAMMING
ABSOLUTE/INCREMENTAL PROGRAMMING
DIAMETER PROGRAMMING
DECIMAL POINT PROGRAMMING
TOOL NOSE RADIUS COMPENSATION
PROGRAM SEARCH/SEQUENCE NUMBER SEARCH
CANNED CYCLES-TURN, CONTOUR, FACE, THREAD, DRILL, GROOVE,
AND PATTERN REPEAT (CASTING CYCLE)
HARDINGE CUSTOM MACRO CYCLES-FEED STOCK, DEEP-HOLE DRILL,
TAP, KNURL, DIE HEAD THREAD, CUT-OFF COLLET DWELL, AND VERTICAL SLIDE/PARTS
CHUTE ACTIVATE
CONTINUOUS LEAD THREAD CUTTING
WORK COORDINATE SYSTEM (PART POSITION OFFSET)
SPINDLE SPEED RANGE (50 TO 5000 RPM)
200 IPM (5 MPG) X- AND Z-AXIS TRAVERSE RATE
MANUAL PULSE GENERATOR (MPG) HAND WHEEL
TOOL DATA OFFSETS-32 PAIR/AXIS
SPINDLE JOG
MISCELLANEOUS:
STORED PITCH ERROR COMPENSATION
DRY RUN
MACHINE LOCK (PROGRAM TEST MODE)
14-INCH, COLOR CRT FOR GRAPHIC DISPLAY-GRAPHIC TOOL PATH
SIMULATION WITH DATA DISPLAY IN ENGLISH TEXT
OIL-TIGHT MEMBRANE MACHINE CONTROL PANEL WITH TACTILE
FEEDBACK
SPINDLE LOAD METER
MANUAL FEEDRATE OVERRIDE (0 TO 120%)
MANUAL RAPID TRAVERSE OVERRIDE (LOW-15-50-100%)
MANUAL SPINDLE SPEED OVERRIDE (50 TO 120%)
REVERSAL ERROR COMPENSATION (X-AND Z-AXIS)
HIGH-ACCURACY ENCODER FEEDBACK SYSTEM
SOFTWARE OVER TRAVEL LIMITS
SYSTEM TEST AND DIAGNOSTICS
OPERATOR MESSAGES
EQUIPPED WITH:
- GN FANUC 10TF CONTROL W/FAPT PROGRAMMING AND 0.0001"
PROGRAMMABLE RESOLUTION AND TOOL OFFSET CAPABILITY
- 14" COLOR CRT
- COLLET CHUCK
|
